Adult products liquid silica gel series of products with low hardness, high tear resistance, human texture simulation and other characteristics.Suitable for human body, adult, artificial body production, this series of products low viscosity, can be used in injection molding process.
Main technical parameters:
Type no. E600 # A. E600 # B
Outside view: Skin color/translucent Skin color/translucent
Proportion of components: A and B
9:1 1:1
Viscosity (10,000 CPS) 4 4
Hardness (JIS A) 0 0
Tear strength (KN/m) 24 24
Tensile strength (Mpa) 4.5 4.5
Elongation at break (%) 300 300
Operating time (25℃/h) 48 2
Usage:
The components A and B were evenly mixed in proportion to weight, and then molded by injection molding process or by infusion and heating after vacuum bleating.
Storage and precautions:
1, plus molding series of products for non-dangerous goods, sealed storage, stored in a cool place, to prevent rain, sun exposure.
2. It shall be prohibited to mix with the organic tin compounds of condensed silicone rubber in the use of the molding series products; otherwise, the rubber material shall not be vulcanized, and the compounds containing sulfur, phosphorus and nitrogen shall not be mixed, otherwise the product shall not be completely or completely vulcanized.
